Ford F-250 Super Duty Truck Bed Extender Installation And Review Videos

Darby Extend A Truck Hitch Cargo Carrier Review - 2017 Ford F-250 Super Duty- Video

Hayden: Hayden here at etrailer.com. Today on our 2017 Ford F-250 Super Duty SuperCrew Cab, we're going to be doing a test fit of the Darby Extend-A-Truck, part number DTA944. This extender uses your hitch to help you carry elongated loads. It can be either installed in the horizontal position or the vertical position to work in your truck bed or roof. The platform here has two tie-down anchor points to secure a load. It's four feet long. more

5/23/2017 2:57:12 PM

Darby Extend A Truck Hitch Cargo Carrier Review - 2016 Ford F-250 Super Duty- Video

Today on our 2016 F250 Super Duty we're doing a test fit of the Darby Extend-A-Truck Hitch Load Extender. That part number is, DTA944. We've already got it in our first position here. We're going to go over some features. Then we'll show you our second position and take a few measurements as well. Here we have it lined up with the roof of our cab area. This is going to be great if you want to carry any PVC pipe, or large loads, on the top of your vehicle. If you have crossbars it's going to be even better because it will line up with those as well. One thing you'll notice is, we do have tie down points on either side. more

11/19/2015 12:56:06 PM

Darby Extend A Truck Hitch Cargo Carrier Review - 2015 Ford F-250 Super Duty- Video

Today on our 2015 Ford F250 Super Duty, we're going to be doing a test fit of the Darby Extend-A-Truck hitch mounted load extender. It's going to come with two adjustable settings and for a rise or a fall of seven inches. We're going to show you how it looks on the hitch that we have on here on our truck part number DTA944. All right, this is going to be your extended version. We'll insert that two inch shank into your two inch receiver and line up our pin holes. Now this will give you a lot of ability to carry many different things on the back of your truck if you need to. Raise down, drop down the tailgate, just take your tape measure find out how high you need to go, about 37 inches, we'll pull the clip and the pin and go and raise this to meet up with that. more

6/3/2015 3:41:24 PM